13 1/2″ VATS Needle Holder 7mm Shaft Heavy TC Jaws
Direct Manufacturer Pricing • Tax Exclusive
- 13 1/2″ VATS Needle Holder 7mm Shaft Heavy TC Jaws designed with a straight configuration for controlled needle manipulation and suturing.
- 7 mm Heavy TC Jaws provide a defined grasping profile for cardiovascular procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for cardiovascular and thoracic surgery applications requiring a straight needle holder.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 13 1/2″ VATS Needle Holder 7mm Shaft Heavy TC Jaws is a specialized cardiovascular instrument designed for controlled needle manipulation and suturing during video-assisted thoracic surgery (VATS) and other minimally invasive procedures. Its extended 13 1/2-inch length provides the reach required to access deeper structures within the thoracic cavity while allowing the surgeon to maintain controlled instrument positioning outside the operative field.
With an overall length of 13 1/2 inches and a 7 mm shaft, this needle holder provides a defined grasping profile for cardiovascular applications. The heavy tungsten carbide jaws allow for secure handling of needles and sutures, supporting precise manual manipulation during procedures.
Key Features
- 13 1/2-inch overall length for extended reach and controlled handling.
- 7 mm shaft diameter provides a defined grasping profile.
- Heavy tungsten carbide jaws for secure needle handling.
- Designed for controlled needle manipulation and suturing.
- Suitable for cardiovascular and thoracic surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized VATS pattern for professional cardiovascular instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | VATS Needle Holder |
| Overall Length | 13 1/2″ |
| Working End / Blade / Jaw | 7 mm Heavy TC Jaws |
| Configuration | Straight |
| Primary Function | Needle Manipulation and Suturing |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Cardiovascular / Thoracic Surgery |
The 13 1/2″ VATS Needle Holder 7mm Shaft Heavy TC Jaws combines a 13 1/2-inch overall length with a 7 mm shaft and heavy tungsten carbide jaws.
Its defined working profile is intended for controlled needle manipulation and suturing in cardiovascular applications.
Design & Function
The VATS Needle Holder features a straight working configuration designed to provide a specialized orientation during thoracic procedures. The heavy tungsten carbide jaws can assist in positioning the working end according to the requirements of the operative field.
The 7 mm jaw profile provides a defined grasping profile, while the 13 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for cardiovascular procedures requiring a straight needle holder.
Surgical Applications
The 13 1/2″ VATS Needle Holder 7mm Shaft Heavy TC Jaws may be used for cardiovascular and thoracic surgery applications involving controlled needle manipulation and suturing. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the VATS Needle Holder before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the VATS Needle Holder appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this VATS Needle Holder?
The overall length is 13 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 7 mm Heavy TC Jaws.
3. Is this VATS Needle Holder curved or straight?
It features a Straight configuration.
4. What is a VATS Needle Holder used for?
It is designed for controlled needle manipulation and suturing in cardiovascular applications.
5. What clinical advantage does the heavy tungsten carbide jaws provide?
The jaws provide a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for cardiovascular surgery?
It may be used in cardiovascular and thoracic surgery applications where a straight needle holder is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the VATS Needle Holder be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.