5 1/2″ K Wire Cutter TC End Cutter Max. 1.1mm
Direct Manufacturer Pricing • Tax Exclusive
The 5½″ K-Wire Cutter TC End Cutter is an orthopedic instrument designed for cutting compatible Kirschner wires up to a maximum stated diameter of 1.1mm. Its end-cutting configuration supports access to wire ends, while tungsten carbide (TC) components are intended to provide a durable cutting edge. Confirm the manufacturer's specifications and wire compatibility before use.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 5½″ K-Wire Cutter TC End Cutter is a specialized orthopedic instrument designed for cutting compatible Kirschner wires, commonly known as K-wires. With a listed overall length of 5½ inches and a maximum cutting capacity of 1.1mm, it is intended for applications that require a suitable wire-cutting instrument within this specified range.
Tungsten Carbide Cutting Components
The designation TC commonly refers to tungsten carbide, a hard material used in cutting edges to support wear resistance and cutting performance. The exact construction of the cutting jaws, including whether the entire cutting edge or only specific components contain tungsten carbide, should be confirmed with the manufacturer.
End-Cutting Design
An end cutter is designed to cut material at the end of the instrument's jaws. This configuration can be useful when trimming compatible wire ends in orthopedic settings. The jaw profile and cutting geometry should match the type and diameter of wire being processed.
Maximum Cutting Capacity of 1.1mm
The stated maximum cutting capacity is 1.1mm. Using the instrument beyond its specified capacity may damage the cutting edges or compromise performance. Before use, confirm the permitted wire material, diameter, and hardness with the manufacturer's instructions. Do not assume compatibility with every type of orthopedic wire.
Compact 5½-Inch Length
The overall length of 5½ inches is approximately 14cm. This compact format may support handling in suitable orthopedic instrument setups. The actual reach, leverage, and access characteristics depend on the handle design and jaw geometry.
Instrument Care and Maintenance
Before purchasing, verify the cutting capacity, TC component specifications, handle design, and compatibility with the intended wire. Inspect the jaws for damage, misalignment, or wear before use. Cleaning, sterilization, lubrication where applicable, and maintenance should follow the manufacturer's validated instructions.
5. Key Features
Instrument Type: K-Wire End Cutter
Overall Length: 5½ inches (approximately 14cm)
Maximum Cutting Capacity: 1.1mm
Cutting Design: End-cutting jaws
TC Designation: Tungsten carbide; exact construction to be confirmed
Application: Cutting compatible Kirschner wires
Jaw Configuration: End cutter
Wire Compatibility: Confirm material and diameter requirements
Maintenance: Follow manufacturer instructions
Intended Users: Qualified orthopedic professionals
6. Product Specifications
Specification | Details |
|---|---|
Product Name | 5½″ K-Wire Cutter TC End Cutter |
Product Category | Orthopedic Surgical Instruments |
Instrument Type | K-Wire Cutter |
Cutter Pattern | End Cutter |
Overall Length | 5½″ / approximately 14cm |
Maximum Cutting Capacity | 1.1mm |
Cutting Edge | TC-designated; confirm exact construction |
Compatible Wire Type | Kirschner wire, subject to manufacturer specifications |
Handle Design | Not specified |
Material | Confirm with manufacturer |
Reprocessing | Follow manufacturer instructions |
Suggested SKU | ORT-KWC-TC-055-11 |
7. Frequently Asked Questions
1. What is a K-Wire Cutter used for?
A K-Wire Cutter is used to cut compatible Kirschner wires used in selected orthopedic procedures.
2. What is the maximum cutting capacity of this cutter?
The stated maximum cutting capacity is 1.1mm. Always follow the manufacturer's limits for wire diameter and material.
3. What does TC mean in a K-Wire Cutter?
TC commonly stands for tungsten carbide, a hard material used in cutting edges. Confirm the exact construction of this model with the manufacturer.
4. What does end cutter mean?
An end cutter has cutting jaws designed to cut material at the end of the instrument rather than along the side of the jaws.
5. How long is this K-Wire Cutter?
The listed overall length is 5½ inches, approximately 14cm.
6. Can this cutter cut wires larger than 1.1mm?
Do not exceed the stated maximum capacity unless the manufacturer explicitly approves it. Oversized or incompatible wire may damage the cutter.
7. Can it cut every type of K-wire?
Not necessarily. Compatibility depends on wire diameter, material, and hardness. Consult the manufacturer's specifications.
8. How should the cutter be maintained?
Inspect the cutting edges regularly and follow the manufacturer's validated cleaning, sterilization, and maintenance instructions.
9. Is the cutter reusable?
The product title does not establish its reuse status. Confirm the manufacturer's instructions for use and reprocessing requirements.
10. What should buyers verify before ordering?
Confirm the 5½-inch length, 1.1mm maximum cutting capacity, TC construction, compatible wire types, and applicable cleaning and sterilization requirements.