5 1/2″ Hoen IVD Rongeur 1×2 Teeth 4mm
Direct Manufacturer Pricing • Tax Exclusive
- 5 1/2″ Hoen IVD Rongeur 1×2 Teeth 4mm designed with a 1×2 toothed configuration for controlled excision and removal of intervertebral disc material.
- 4 mm bite provides a defined grasping profile for neurosurgical procedures.
- Compact design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and spinal surgery applications requiring a rongeur.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 5 1/2″ Hoen IVD Rongeur 1×2 Teeth 4mm is a specialized neurosurgical instrument designed for controlled excision and removal of intervertebral disc material. Its 1×2 toothed jaws provide a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 5 1/2 inches and a 4 mm bite, this rongeur provides a defined grasping profile for neurosurgical applications. The compact design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 5 1/2-inch overall length for controlled manual handling.
- 4 mm bite provides a defined grasping profile.
- 1×2 toothed jaw configuration for specialized working orientation.
- Designed for controlled excision and removal of intervertebral disc material.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Hoen pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Hoen IVD Rongeur |
| Overall Length | 5 1/2″ |
| Working End / Blade / Jaw | 4 mm |
| Configuration | 1×2 Teeth |
| Primary Function | Controlled Excision and Removal |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 5 1/2″ Hoen IVD Rongeur 1×2 Teeth 4mm combines a 5 1/2-inch overall length with a 4 mm bite and 1×2 toothed jaw configuration.
Its defined working profile is intended for controlled excision and removal of intervertebral disc material in neurosurgical applications.
Design & Function
The Hoen IVD Rongeur features a 1×2 toothed jaw configuration designed to provide a specialized orientation during disc excision. The jaw design can assist in positioning the working end according to the requirements of the operative field.
The 4 mm bite provides a defined grasping profile, while the 5 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a rongeur.
Surgical Applications
The 5 1/2″ Hoen IVD Rongeur 1×2 Teeth 4mm may be used for neurosurgical and spinal surgery applications involving the excision and removal of intervertebral disc material. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the rongeur before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the rongeur appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Rongeur?
The overall length is 5 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4 mm.
3. Is this Rongeur curved or straight?
It features a 1×2 Teeth configuration.
4. What is a Rongeur used for?
It is designed for controlled excision and removal in neurosurgical applications.
5. What clinical advantage does the toothed jaw design provide?
The toothed jaw provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and spinal surgery applications where a 1×2 toothed rongeur is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Rongeur be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.