6 1/4″ Dautrey-Munro Osteotome 4mm
Direct Manufacturer Pricing • Tax Exclusive
- 6 1/4″ Dautrey-Munro Osteotome 4mm designed with a straight configuration for controlled bone cutting and shaping.
- 4 mm working width provides a defined cutting profile for maxillofacial procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for maxillofacial and oral surgery applications requiring a straight Osteotome.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 6 1/4″ Dautrey-Munro Osteotome 4mm is a specialized maxillofacial instrument designed for controlled bone cutting, shaping, and separation. Its 4 mm blade provides a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 6 1/4 inches and a 4 mm working width, this osteotome provides a defined cutting profile for maxillofacial applications. The straight design allows the working end to approach bone from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 6 1/4-inch overall length for controlled manual handling.
- 4 mm working width provides a defined cutting profile.
- Straight configuration for specialized working orientation.
- Designed for controlled bone cutting and shaping.
- Suitable for maxillofacial and oral surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Dautrey-Munro pattern for professional maxillofacial instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Dautrey-Munro Osteotome |
| Overall Length | 6 1/4″ |
| Working End / Blade / Jaw | 4 mm |
| Configuration | Straight |
| Primary Function | Bone Cutting and Shaping |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Maxillofacial / Oral Surgery |
The 6 1/4″ Dautrey-Munro Osteotome 4mm combines a 6 1/4-inch overall length with a 4 mm working width and straight configuration.
Its defined working profile is intended for controlled bone cutting and shaping in maxillofacial applications.
Design & Function
The Dautrey-Munro Osteotome features a straight working configuration designed to provide a specialized orientation during bone preparation. The 4 mm blade can assist in positioning the cutting end according to the requirements of the operative field.
The 4 mm working dimension provides a defined cutting profile, while the 6 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for maxillofacial procedures requiring a straight instrument type.
Surgical Applications
The 6 1/4″ Dautrey-Munro Osteotome 4mm may be used for maxillofacial and oral surgery applications involving controlled bone cutting and shaping. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Dautrey-Munro Osteotome before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Dautrey-Munro Osteotome appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Osteotome?
The overall length is 6 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4 mm.
3. Is this Osteotome curved or straight?
It features a Straight configuration.
4. What is a Dautrey-Munro Osteotome used for?
It is designed for controlled bone cutting and shaping in maxillofacial applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for maxillofacial surgery?
It may be used in maxillofacial and oral surgery applications where a straight 4 mm Osteotome is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Osteotome be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.