6 1/4″ Pin Cutter End Cutting, Capacity 2.0mm
Direct Manufacturer Pricing • Tax Exclusive
The 6.25″ Pin Cutter End Cutting is a specialized cutting instrument with a stated cutting capacity of 2.0mm. Its end-cutting design supports access to compatible pins or wires where controlled cutting is required in appropriate surgical and orthopedic settings.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 6.25″ Pin Cutter End Cutting, Capacity 2.0mm is a specialized instrument designed for cutting compatible pins or wires within its specified capacity. Its end-cutting configuration distinguishes it from side-cutting designs and may be useful when the cutting approach needs to be directed toward the end of the material.
With an overall length of 6.25 inches, approximately 15.9 cm, this cutter offers a compact profile for appropriate professional applications. The 2.0mm capacity is a key selection specification and should be interpreted according to the manufacturer's guidance on compatible material types and hardness.
End-Cutting Design
End-cutting instruments are designed to cut material at the cutting end of the jaws rather than primarily from the side. This configuration may support access in situations where the end of a compatible pin or wire needs to be trimmed.
The exact jaw geometry, cutting-edge design, and suitability for particular pin materials are not specified in the product title. Confirm these details with the manufacturer before use to avoid exceeding the instrument's capabilities.
2.0mm Cutting Capacity
The stated cutting capacity is 2.0mm. This measurement identifies the maximum specified diameter under the manufacturer's defined conditions; it does not necessarily mean the cutter can safely cut every material of that diameter.
Cutting performance can depend on material hardness, wire or pin composition, and the instrument's construction. Users should verify the approved material types and capacity limits before selecting the cutter for a particular task.
Surgical and Orthopedic Applications
Pin cutters are used in appropriate settings to trim compatible pins or wires. The precise applications for this model depend on the instrument's design and manufacturer-validated indications. It should be used only with materials and in procedures for which the manufacturer confirms suitability.
Before purchase, compare the cutting capacity, jaw design, overall length, and intended application with the requirements of the surgical or orthopedic instrument set.
Material, Maintenance, and Care
The construction material, handle finish, and reusable status are not specified in the product title. Confirm these details with the manufacturer or supplier.
If the cutter is designated as reusable, follow the manufacturer's validated instructions for cleaning, disinfection, sterilization, inspection, and storage. Inspect the cutting edges and joint before use. Do not use the instrument if the cutting edges are damaged, the jaws are misaligned, or the mechanism does not operate correctly.
Key Features
Instrument Type: Pin Cutter
Cutting Design: End cutting
Overall Length: 6.25 inches
Approximate Metric Length: 15.9 cm
Specified Cutting Capacity: 2.0mm
Primary Function: Cutting compatible pins or wires
Instrument Profile: Compact cutting instrument
Material Compatibility: Confirm with manufacturer
Cutting Edge Design: End-cutting configuration
Construction Material: Not specified
Reusable Status: Verify product labeling
Maintenance: Follow manufacturer-approved processing instructions
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Pin Cutter |
| Instrument Category | Surgical / Orthopedic Cutting Instrument |
| Overall Length | 6.25 inches |
| Approximate Metric Length | 15.9 cm |
| Cutting Design | End cutting |
| Cutting Capacity | 2.0mm |
| Compatible Material Types | Confirm with manufacturer |
| Jaw Configuration | End-cutting jaws |
| Construction Material | Not specified |
| Handle Finish | Not specified |
| Intended Application | Cutting compatible pins or wires within rated capacity |
| Reusable or Single-Use Status | Confirm with manufacturer |
| Cleaning and Sterilization | Follow manufacturer instructions |
Frequently Asked Questions
1. What is a 6.25″ end-cutting pin cutter used for?
It is designed to cut compatible pins or wires from the end, provided the material and diameter are within the manufacturer's approved limits.
2. What is the cutting capacity of this pin cutter?
The listed cutting capacity is 2.0mm. Confirm the approved material types and operating conditions with the manufacturer.
3. What does end cutting mean?
End cutting describes a jaw design that cuts material at the end of the cutting edges rather than primarily from the side.
4. What is the overall length of this cutter?
The listed overall length is 6.25 inches, approximately 15.9 cm.
5. Can it cut all pins or wires up to 2.0mm?
Not necessarily. Cutting suitability depends on material hardness, composition, and the manufacturer's specifications. Do not assume every material within the diameter limit is compatible.
6. Is this pin cutter suitable for orthopedic use?
It may be suitable for appropriate orthopedic applications when the material and task match the manufacturer's intended use and cutting-capacity limits.
7. What material is the cutter made from?
The product title does not specify the construction material. Contact the supplier for the material grade and technical details.
8. How should the pin cutter be maintained?
Follow the manufacturer's cleaning, inspection, and processing instructions. Check the cutting edges and joint regularly, and discontinue use if the instrument is damaged or no longer cuts correctly.