8 1/2″ Ollier Retractor 4 Prongs
Direct Manufacturer Pricing • Tax Exclusive
- 8 1/2″ Ollier Retractor designed with a four prong configuration for secure tissue retraction.
- Four prong design provides a defined retraction profile for neurosurgical procedures.
- Ergonomic design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and orthopedic applications requiring a four prong retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 8 1/2″ Ollier Retractor is a specialized neurosurgical instrument designed for secure retraction of dense tissue, muscles, and fascia during orthopedic, general, and thoracic surgeries. Its four prongs provide a distinct working orientation that can assist with positioning the working end within the operative field.
With an overall length of 8 1/2 inches and a four-prong design, this retractor provides a defined retraction profile for neurosurgical applications. The ergonomic design allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 8 1/2-inch overall length for controlled manual handling.
- Four prong design provides a defined retraction profile.
- Ergonomic design for specialized working orientation.
- Designed for secure tissue retraction and exposure.
- Suitable for orthopedic, general, and thoracic surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Ollier pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Ollier Retractor |
| Overall Length | 8 1/2″ |
| Working End / Blade / Jaw | Four prong design |
| Configuration | Four Prong |
| Primary Function | Tissue Retraction |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical / Tissue Retraction |
The 8 1/2″ Ollier Retractor combines an 8 1/2-inch overall length with a four prong design.
Its defined working profile is intended for secure tissue retraction in neurosurgical applications.
Design & Function
The Ollier Retractor features a four prong working configuration designed to provide a specialized orientation during tissue retraction. The prong design can assist in positioning the working end according to the requirements of the operative field.
The four prong design provides a defined retraction profile, while the 8 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a four prong retractor.
Surgical Applications
The 8 1/2″ Ollier Retractor may be used for neurosurgical and orthopedic applications involving secure retraction of dense tissue and fascia. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Ollier Retractor before use, paying particular attention to the working end and prong alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Ollier Retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Retractor?
The overall length is 8 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features four prong design.
3. Is this Retractor curved or straight?
It features a four prong configuration.
4. What is a Retractor used for?
It is designed for controlled tissue retraction in neurosurgical applications.
5. What clinical advantage does the prong design provide?
The prong design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and orthopedic applications where a four prong retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.