8 3/4″ Obwegeser Retractor 35×10mm Down
Direct Manufacturer Pricing • Tax Exclusive
- 8 3/4″ Obwegeser Retractor 35×10mm Down designed with a downward configuration for atraumatic soft tissue retraction.
- 35×10 mm blade dimension provides a defined retraction profile for maxillofacial procedures.
- Downward design supports a specialized working orientation within the operative field.
- Suitable for maxillofacial and mandibular surgery applications requiring a downward retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 8 3/4″ Obwegeser Retractor 35×10mm Down is a specialized maxillofacial instrument designed for atraumatic and controlled retraction of soft tissues during mandibular and maxillofacial surgeries. Its downward-oriented blade provides a distinct working orientation that can assist with positioning the blade within the operative field.
With an overall length of 8 3/4 inches and a blade dimension of 35×10 mm, this retractor provides a defined retraction profile for maxillofacial applications. The downward configuration allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 8 3/4-inch overall length for controlled manual handling.
- 35×10 mm blade dimension provides a defined retraction profile.
- Downward configuration for specialized working orientation.
- Designed for atraumatic soft tissue retraction.
- Suitable for maxillofacial and mandibular surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Obwegeser pattern for professional maxillofacial instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Obwegeser Retractor |
| Overall Length | 8 3/4″ |
| Working End / Blade / Jaw | 35×10 mm |
| Configuration | Downward |
| Primary Function | Atraumatic Soft Tissue Retraction |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Maxillofacial / Mandibular Surgery |
The 8 3/4″ Obwegeser Retractor 35×10mm Down combines an 8 3/4-inch overall length with a 35×10 mm blade dimension and downward configuration.
Its defined working profile is intended for atraumatic soft tissue retraction in maxillofacial applications.
Design & Function
The Obwegeser Retractor features a downward working configuration designed to provide a specialized orientation during mandibular and maxillofacial procedures. The blade design can assist in positioning the working end according to the requirements of the operative field.
The 35×10 mm blade profile provides a defined retraction profile, while the 8 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for maxillofacial procedures requiring a downward instrument type.
Surgical Applications
The 8 3/4″ Obwegeser Retractor 35×10mm Down may be used for maxillofacial and mandibular surgery applications involving atraumatic soft tissue retraction. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the retractor before use, paying particular attention to the working end and blade alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Retractor?
The overall length is 8 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 35×10 mm blade dimension.
3. Is this Retractor curved or straight?
It features a downward configuration.
4. What is a Retractor used for?
It is designed for controlled atraumatic soft tissue retraction in maxillofacial applications.
5. What clinical advantage does the downward configuration provide?
The downward configuration provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for maxillofacial surgery?
It may be used in maxillofacial and mandibular surgery applications where a downward retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.