7 1/2″ Adson Cerebellum Retractor Angled 90° Blunt
Direct Manufacturer Pricing • Tax Exclusive
- 7 1/2″ Adson Cerebellum Retractor Angled 90° Blunt designed with an angled configuration for controlled retraction of cerebellar and posterior fossa tissue.
- Blunt tip design provides a defined retraction profile for neurosurgical procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and cerebellar surgery applications requiring an angled retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 1/2″ Adson Cerebellum Retractor Angled 90° Blunt is a specialized neurosurgical instrument designed for controlled retraction of cerebellar and posterior fossa tissue. Its 90-degree angled tip provides precise access to deep or lateral structures, while the blunt prongs minimize trauma to delicate neural tissue.
With an overall length of 7 1/2 inches and a blunt tip design, this retractor provides a defined retraction profile for neurosurgical applications. The angled configuration allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7 1/2-inch overall length for controlled manual handling.
- Blunt tip design provides a defined retraction profile.
- Angled 90° configuration for specialized working orientation.
- Designed for controlled retraction of cerebellar and posterior fossa tissue.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Adson pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Adson Cerebellum Retractor |
| Overall Length | 7 1/2″ |
| Working End / Blade / Jaw | Blunt tip design |
| Configuration | Angled 90° |
| Primary Function | Controlled Retraction |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 7 1/2″ Adson Cerebellum Retractor Angled 90° Blunt combines a 7 1/2-inch overall length with a blunt tip design and angled configuration.
Its defined working profile is intended for controlled retraction in neurosurgical applications.
Design & Function
The Adson Cerebellum Retractor features an angled 90° working configuration designed to provide a specialized orientation during neurosurgical procedures. The blunt tip design can assist in positioning the working end according to the requirements of the operative field.
The blunt tip design provides a defined retraction profile, while the 7 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring an angled retractor.
Surgical Applications
The 7 1/2″ Adson Cerebellum Retractor Angled 90° Blunt may be used for neurosurgical and cerebellar surgery applications involving controlled retraction of cerebellar and posterior fossa tissue. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Adson Cerebellum Retractor before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Adson Cerebellum Retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Retractor?
The overall length is 7 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features blunt tip design.
3. Is this Retractor angled or straight?
It features an angled 90° configuration.
4. What is a Retractor used for?
It is designed for controlled retraction in neurosurgical applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and cerebellar surgery applications where an angled blunt retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.