7″ Anderson-Adson Cerebellum Retractor Angled Blunt 4X4
Direct Manufacturer Pricing • Tax Exclusive
- 7″ Anderson-Adson Cerebellum Retractor Angled Blunt 4X4 designed with an angled configuration for gentle retraction of delicate neural tissues.
- 4×4 blunt prong tip provides a defined retraction profile for neurosurgical procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and cranial surgery applications requiring an angled retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7″ Anderson-Adson Cerebellum Retractor Angled Blunt 4X4 is a specialized neurosurgical instrument designed for gentle retraction of delicate neural tissues. Its 7-inch length and precise angulation facilitate access to deep cerebellar regions while maintaining optimal visualization.
With an overall length of 7 inches and a blunt 4×4 prong tip, this retractor provides a defined retraction profile for neurosurgical applications. The angled design allows the working end to approach neural tissues from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7-inch overall length for controlled manual handling.
- Blunt 4×4 prong tip provides a defined retraction profile.
- Angled configuration for specialized working orientation.
- Designed for gentle retraction of delicate neural tissues.
- Suitable for neurosurgical and cranial procedures.
- Supports positioning of the working end within the operative field.
- Specialized Anderson-Adson pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Anderson-Adson Cerebellum Retractor |
| Overall Length | 7″ |
| Working End / Blade / Jaw | 4×4 Blunt Prong Tips |
| Configuration | Angled |
| Primary Function | Gentle Retraction of Neural Tissues |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical / Cranial Surgery |
The 7″ Anderson-Adson Cerebellum Retractor Angled Blunt 4X4 combines a 7-inch overall length with a blunt 4×4 prong tip and angled configuration.
Its defined working profile is intended for gentle retraction of delicate neural tissues in neurosurgical applications.
Design & Function
The Anderson-Adson Cerebellum Retractor features an angled working configuration designed to provide a specialized orientation during cranial procedures. The blunt prong tip can assist in positioning the working end according to the requirements of the operative field.
The 4×4 prong tip provides a defined retraction profile, while the 7-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring an angled retractor.
Surgical Applications
The 7″ Anderson-Adson Cerebellum Retractor Angled Blunt 4X4 may be used for neurosurgical and cranial surgery applications involving gentle retraction of neural tissues. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Anderson-Adson Cerebellum Retractor before use, paying particular attention to the working end, jaw alignment, and prong tips. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Anderson-Adson Cerebellum Retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Retractor?
The overall length is 7 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4×4 blunt prong tips.
3. Is this Retractor angled or straight?
It features an angled configuration.
4. What is a Retractor used for?
It is designed for controlled gentle retraction of neural tissues in neurosurgical applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and cranial surgery applications where an angled retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.