The AO External Fixator Set is an orthopedic fixation product intended for use in external skeletal fixation procedures when the supplied components are compatible with the selected system. External fixation uses pins or other fixation elements connected to an external frame to help stabilize bone segments.

This product is described as a 12-piece set containing 5.0 mm Schanz pins and a key. The exact number of pins, available pin lengths, key design, and any additional components are not specified in the product title. Buyers should request the manufacturer's complete inventory before ordering.

The term “AO” appears in the product name, but the title alone does not establish manufacturer affiliation, licensing, or compatibility with a particular external fixation system. Verify the supplier's product documentation and approved applications.

5.0 mm Schanz Pins

Schanz pins are fixation elements used in certain external fixation systems. Their threaded portions engage with bone, while the exposed portions connect with compatible external fixation components according to the system's design.

The product title specifies a 5.0 mm pin size. This measurement does not establish the overall pin length, threaded length, thread profile, tip design, or material. These details should be confirmed with the manufacturer because they influence compatibility and selection.

The appropriate pin design and size depend on the fixation system, anatomical site, patient factors, and clinical requirements. Pin selection and placement should be determined by qualified orthopedic professionals using the manufacturer's instructions.

External Fixation Applications

External fixation systems may be used in selected orthopedic situations requiring temporary or definitive stabilization of bone. Depending on the system and approved indication, these applications can include certain fractures and other conditions where external skeletal stabilization is appropriate.

This product's exact indications cannot be confirmed from the title alone. The set should be evaluated against the intended procedure and the technical requirements of the external fixation frame.

Included Key and Component Compatibility

The product title states that a key is included. The exact type of key and its intended function are not specified. Confirm whether it is designed to tighten or adjust a particular component and whether it matches the intended external fixation system.

Schanz pins, connecting components, clamps, and frame parts are not universally interchangeable. Buyers should verify the approved combinations before procurement or clinical use.

Material and Construction

The material composition of the Schanz pins and key is not specified in the product title. Confirm whether the pins are made from stainless steel, titanium, or another material, and obtain the relevant technical documentation.

Material selection, surface finish, corrosion resistance, and mechanical properties should be evaluated using manufacturer specifications rather than assumptions based on the product category.

Set Configuration and Inventory

The set is advertised as containing 12 pieces. The title does not confirm whether this means 12 Schanz pins, a combined quantity of pins and a key, or a package containing other components.

Before ordering, request an itemized list showing the number of pins, their lengths and dimensions, the key type, and any additional supplied accessories. Confirm whether a storage case is included, as this is not stated.

Handling, Cleaning, and Sterilization

Follow the manufacturer's instructions for handling, cleaning, inspection, storage, and sterilization. Confirm whether the supplied components are reusable and whether they are delivered sterile or non-sterile.

Inspect pins for damage, thread wear, corrosion, or deformation before use. Verify the condition and compatibility of the key and other fixation components. Preparation and clinical use must follow the manufacturer's validated instructions and the healthcare facility's protocols.

Choosing the Right External Fixator Set

When selecting an external fixation set, verify the pin diameter and length, threaded dimensions, material, key compatibility, and the fixation system for which the components are approved. A 5.0 mm diameter alone does not guarantee that a pin is compatible with every external fixator.

Healthcare procurement teams should also review the complete inventory, manufacturer traceability, instructions for use, and applicable regulatory documentation. These checks help ensure that the supplied set meets the intended clinical and purchasing requirements.

Key Features

• External fixation set for orthopedic applications.

• Includes 5.0 mm Schanz pins, as stated in the product title.

• Includes a key, according to the listed configuration.

• Total stated set quantity: 12 pieces.

• Intended for use with a compatible external fixation system.

• Pin lengths and threaded dimensions are not specified.

• Material composition requires manufacturer confirmation.

• Key type and function should be verified.

• Reusability and sterilization requirements are not specified.

• Complete component inventory should be confirmed before ordering.

Product Specifications

Frequently Asked Questions

1. What is an external fixator set used for?

An external fixator set contains components intended for use in selected procedures requiring stabilization of bone through an external fixation frame. Suitability depends on the system, procedure, and manufacturer-approved indications.

2. What size Schanz pins are included?

The product title specifies 5.0 mm Schanz pins. Their lengths, threaded dimensions, and tip designs are not provided.

3. How many pieces are included?

The title states that the set contains 12 pieces. Request an itemized inventory to confirm the number of pins, the included key, and any other components.

4. What is the included key used for?

The product title confirms a key is included but does not identify its exact type or function. Ask the supplier to verify which fixation component it operates and which system it fits.

5. Are these Schanz pins compatible with all external fixation systems?

No. Compatibility depends on pin dimensions, thread design, material, and the external fixation system. Confirm approved compatibility with the manufacturer.

6. What material are the pins made from?

The material is not specified. Request the manufacturer's material specifications and relevant technical documentation.

7. Can the components be reused?

Reusability cannot be determined from the product title. Follow the manufacturer's labeling and instructions for each supplied component.

8. Are the pins supplied sterile?

Sterile status is not specified. Confirm the supplied condition and required preparation procedures with the manufacturer.

9. Does the set include clamps or a complete external fixation frame?

The title mentions Schanz pins and a key only. Clamps, rods, connectors, and a complete frame should not be assumed to be included without a confirmed packing list.

10. What should buyers check before ordering?

Confirm the 12-piece inventory, pin diameter and lengths, thread dimensions, material, key type, fixation system compatibility, sterile status, manufacturer documentation, and applicable regulatory requirements.