7″ Spinal Fusion Osteotome 4mm Curved
Direct Manufacturer Pricing • Tax Exclusive
- 7″ Spinal Fusion Osteotome 4mm Curved designed with a curved configuration for controlled bone preparation.
- 4 mm working width provides a defined cutting profile for neurosurgical procedures.
- Curved design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and spinal fusion applications requiring a curved osteotome.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7″ Spinal Fusion Osteotome 4mm Curved is a specialized neurosurgical instrument designed for controlled bone preparation during spinal fusion procedures. Its curved blade provides a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 7 inches and a 4 mm working width, this osteotome provides a defined cutting profile for neurosurgical applications. The curved design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7-inch overall length for controlled manual handling.
- 4 mm working width provides a defined cutting profile.
- Curved configuration for specialized working orientation.
- Designed for controlled bone preparation during spinal fusion.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Spinal Fusion pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Spinal Fusion Osteotome |
| Overall Length | 7″ |
| Working End / Blade / Jaw | 4 mm |
| Configuration | Curved |
| Primary Function | Bone Preparation |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 7″ Spinal Fusion Osteotome 4mm Curved combines a 7-inch overall length with a 4 mm working width and curved configuration.
Its defined working profile is intended for controlled bone preparation in neurosurgical applications.
Design & Function
The Spinal Fusion Osteotome features a curved working configuration designed to provide a specialized orientation during spinal fusion procedures. The curved blade can assist in positioning the working end according to the requirements of the operative field.
The 4 mm working width provides a defined cutting profile, while the 7-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a curved osteotome.
Surgical Applications
The 7″ Spinal Fusion Osteotome 4mm Curved may be used for neurosurgical and spinal fusion applications involving controlled bone preparation. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Spinal Fusion Osteotome before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Spinal Fusion Osteotome appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Osteotome?
The overall length is 7 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4 mm working width.
3. Is this Osteotome curved or straight?
It features a curved configuration.
4. What is a Spinal Fusion Osteotome used for?
It is designed for controlled bone preparation in neurosurgical applications.
5. What clinical advantage does the curved design provide?
The curved design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and spinal fusion applications where a curved osteotome is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Osteotome be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.