7 1/2″ Spinal Fusion Osteotome 6mm Straight
Direct Manufacturer Pricing • Tax Exclusive
- 7 1/2″ Spinal Fusion Osteotome 6mm Straight designed with a straight configuration for controlled bone cutting.
- 6 mm cutting edge provides a defined cutting profile for neurosurgical procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and orthopedic applications requiring a straight osteotome.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 7 1/2″ Spinal Fusion Osteotome 6mm Straight is a specialized neurosurgical instrument designed for controlled bone cutting during spinal fusion and orthopedic procedures. Its straight blade provides a direct force transmission that can assist with positioning the cutting end within the operative field.
With an overall length of 7 1/2 inches and a 6 mm cutting edge, this osteotome provides a defined cutting profile for neurosurgical applications. The straight design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 7 1/2-inch overall length for controlled manual handling.
- 6 mm cutting edge provides a defined cutting profile.
- Straight configuration for specialized working orientation.
- Designed for controlled bone cutting during spinal fusion.
- Suitable for neurosurgical and orthopedic applications.
- Supports positioning of the working end within the operative field.
- Specialized Spinal Fusion pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Spinal Fusion Osteotome |
| Overall Length | 7 1/2″ |
| Working End / Blade / Jaw | 6 mm cutting edge |
| Configuration | Straight |
| Primary Function | Bone Cutting |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical / Orthopedic |
The 7 1/2″ Spinal Fusion Osteotome 6mm Straight combines a 7 1/2-inch overall length with a 6 mm cutting edge and straight configuration.
Its defined working profile is intended for controlled bone cutting in neurosurgical applications.
Design & Function
The Spinal Fusion Osteotome features a straight working configuration designed to provide a specialized orientation during spinal preparation. The straight blade design can assist in positioning the cutting end according to the requirements of the operative field.
The 6 mm cutting edge provides a defined cutting profile, while the 7 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a straight osteotome.
Surgical Applications
The 7 1/2″ Spinal Fusion Osteotome 6mm Straight may be used for neurosurgical and orthopedic applications involving controlled bone cutting. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the spinal fusion osteotome before use, paying particular attention to the working end, blade alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the spinal fusion osteotome appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Osteotome?
The overall length is 7 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features 6 mm cutting edge.
3. Is this Osteotome curved or straight?
It features a Straight configuration.
4. What is a Spinal Fusion Osteotome used for?
It is designed for controlled bone cutting in neurosurgical applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgical surgery?
It may be used in neurosurgical and orthopedic applications where a straight osteotome is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Osteotome be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.