11 3/4″ Dahmen-Lexer Chisel 10mm Wide
Direct Manufacturer Pricing • Tax Exclusive
- 11 3/4″ Dahmen-Lexer Chisel designed with a straight configuration for controlled bone cutting and shaping.
- 10 mm working width provides a defined cutting profile for neurosurgical procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and orthopedic applications requiring a straight chisel.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 11 3/4″ Dahmen-Lexer Chisel is a specialized neurosurgical instrument designed for controlled bone cutting, shaping, and preparation. Its 10 mm wide working end provides a distinct working orientation that can assist with positioning the cutting end within the operative field.
With an overall length of 11 3/4 inches and a 10 mm working width, this chisel provides a defined cutting profile for neurosurgical applications. The straight design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 11 3/4-inch overall length for controlled manual handling.
- 10 mm working width provides a defined cutting profile.
- Straight configuration for specialized working orientation.
- Designed for controlled bone cutting and shaping.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Dahmen-Lexer pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Dahmen-Lexer Chisel |
| Overall Length | 11 3/4″ |
| Working End / Blade / Jaw | 10 mm |
| Configuration | Straight |
| Primary Function | Bone Cutting and Shaping |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 11 3/4″ Dahmen-Lexer Chisel combines a 11 3/4-inch overall length with a 10 mm working width and straight configuration.
Its defined working profile is intended for controlled bone cutting and shaping in neurosurgical applications.
Design & Function
The Dahmen-Lexer Chisel features a straight working configuration designed to provide a specialized orientation during bone preparation. The working end design can assist in positioning the cutting end according to the requirements of the operative field.
The 10 mm working width provides a defined cutting profile, while the 11 3/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a straight chisel.
Surgical Applications
The 11 3/4″ Dahmen-Lexer Chisel may be used for neurosurgical and orthopedic applications involving controlled bone cutting and shaping. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the chisel before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the chisel appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Chisel?
The overall length is 11 3/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 10 mm working width.
3. Is this Chisel curved or straight?
It features a Straight configuration.
4. What is a Chisel used for?
It is designed for controlled bone cutting and shaping in neurosurgical applications.
5. What clinical advantage does the straight design provide?
The straight design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and orthopedic applications where a straight chisel is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Chisel be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.