Faure Artery Forceps are specialized surgical instruments identified by their straight configuration, 1 x 2 teeth arrangement, and longitudinally serrated jaws. These design features distinguish the instrument from artery forceps with smooth jaws, different tooth arrangements, or curved working ends.

The straight design provides a direct working profile, while the specified tooth configuration and serrations identify the jaw pattern. The suitability of these features depends on the intended procedure, the tissue being handled, and the instrument's verified dimensions.

Jaw Design and Tooth Configuration

The 1 x 2 teeth arrangement is a defining characteristic of this Faure artery forceps model. It describes the specified interlocking tooth configuration, which should be verified against the manufacturer's product images or technical documentation to confirm the exact jaw pattern.

Longitudinal serrations run along the length of the jaw surface. These serrations are designed to provide a defined gripping surface, while the teeth contribute to the instrument's engagement characteristics. The precise jaw geometry and intended gripping function should be confirmed using the manufacturer's specifications.

Straight Instrument Configuration

The straight profile distinguishes this model from curved artery forceps. A straight working end can be useful when the procedure calls for a direct instrument approach, depending on the surgical site and technique.

The overall length, jaw length, and handle design have not been specified. These measurements should be confirmed before purchase to ensure that the instrument meets the requirements of the intended application.

Intended Surgical Applications

Artery forceps are used in surgical settings for gripping or controlling vessels and other suitable structures, depending on the instrument's design. However, the precise intended application of this particular Faure model cannot be established from the product title alone.

Healthcare professionals should consult the manufacturer's intended-use documentation before selecting the instrument for a specific procedure. The tooth arrangement and longitudinal serrations should be considered alongside the instrument's size, jaw design, and handling characteristics.

Material and Construction

The manufacturing material and surface finish of this model have not been provided. Buyers should confirm whether the instrument is made from stainless steel or another material and review any available information about its construction and maintenance requirements.

Material specifications can help determine appropriate cleaning, inspection, and processing procedures. Do not assume a particular alloy, corrosion resistance, or reusable status without confirmation from the manufacturer.

Cleaning, Sterilization, and Maintenance

Cleaning, disinfection, and sterilization requirements depend on the instrument's material and the manufacturer's validated instructions. Follow the specified procedures for cleaning the serrated jaws and tooth arrangement, inspecting the working surfaces, and maintaining the instrument.

Do not assume that the forceps are supplied sterile, reusable, or compatible with a particular sterilization method unless the product documentation confirms these details. Inspect the instrument according to manufacturer guidance before use and remove it from service if damage or defects are identified.

Selecting the Appropriate Faure Artery Forceps

When comparing artery forceps, review the straight or curved configuration, jaw serrations, tooth arrangement, overall dimensions, and intended application. The Faure Artery Forceps 1 x 2 Teeth With Longitudinal Serrations Straight should be identified by its complete product name to distinguish it from other jaw patterns and instrument variants.

Confirm the dimensions, material, and intended use with the supplier before ordering. Accurate specifications support informed product selection and reliable surgical instrument inventory management.

Key Features

• Faure artery forceps design

• Straight instrument configuration

• 1 x 2 teeth arrangement

• Longitudinally serrated jaw surfaces

• Defined jaw pattern for product identification

• Distinct from curved and smooth-jaw variants

• Intended application requires manufacturer confirmation

• Overall length and jaw dimensions not specified

• Material and surface finish require verification

• Cleaning and sterilization must follow manufacturer instructions

Product Specifications

Frequently Asked Questions

1. What are Faure Artery Forceps?

Faure Artery Forceps are surgical instruments identified by the Faure design designation. The exact intended application should be confirmed through manufacturer documentation.

2. What does 1 x 2 teeth mean?

It identifies the tooth arrangement specified for the jaws. The exact interlocking pattern should be verified against the manufacturer's product information.

3. What are longitudinal serrations?

Longitudinal serrations are grooves running lengthwise along the jaw surface. Their precise design and intended gripping characteristics depend on the instrument's construction.

4. What is the benefit of a straight configuration?

A straight configuration provides a direct working profile. Its suitability depends on the procedure, surgical site, and requirements of the intended use.

5. Are these forceps suitable for every surgical procedure?

No. Instrument selection should be based on the intended application, jaw configuration, dimensions, and manufacturer's guidance.

6. What material are these Faure artery forceps made from?

The material is not specified in the available product information. Confirm the material grade and surface finish with the supplier.

7. What is the overall length of this instrument?

The overall length has not been provided. Request the manufacturer's dimensional specifications before ordering.

8. Are these artery forceps reusable?

The reuse status is not specified. Confirm whether the instrument is reusable or intended for single use.

9. Can these forceps be sterilized in an autoclave?

Autoclave compatibility has not been confirmed. Follow the manufacturer's validated cleaning and sterilization instructions.

10. What should buyers verify before purchasing?

Confirm the straight configuration, 1 x 2 teeth arrangement, longitudinal serrations, overall dimensions, material, intended application, and approved processing requirements.