12″ Ferris-Smith IVD Rongeur 4x10mm Down
Direct Manufacturer Pricing • Tax Exclusive
- 12″ Ferris-Smith IVD Rongeur designed with a down configuration for controlled removal of intervertebral disc material.
- 4 x 10 mm toothed jaw provides a defined grasping profile for neurosurgical procedures.
- Down design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and spinal surgery applications requiring a down rongeur.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 12″ Ferris-Smith IVD Rongeur is a specialized neurosurgical instrument designed for precise and controlled removal of intervertebral disc material during spinal procedures. Its toothed design ensures secure engagement of tissue, while the down-angled configuration provides enhanced control in deeper operative fields.
With an overall length of 12 inches and a 4 x 10 mm working width, this rongeur provides a defined grasping profile for neurosurgical applications. The down configuration allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 12-inch overall length for superior reach and leverage.
- 4 x 10 mm toothed down-biting jaw provides a defined grasping profile.
- Down configuration for specialized working orientation.
- Designed for controlled removal of intervertebral disc material.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Ferris-Smith pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Ferris-Smith IVD Rongeur |
| Overall Length | 12″ |
| Working End / Blade / Jaw | 4 x 10 mm toothed jaw |
| Configuration | Down |
| Primary Function | Controlled Removal of Intervertebral Disc Material |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 12″ Ferris-Smith IVD Rongeur combines a 12-inch overall length with a 4 x 10 mm toothed jaw and down configuration.
Its defined working profile is intended for controlled removal of intervertebral disc material in neurosurgical applications.
Design & Function
The Ferris-Smith IVD Rongeur features a down working configuration designed to provide a specialized orientation during spinal procedures. The toothed jaw design can assist in positioning the working end according to the requirements of the operative field.
The 4 x 10 mm toothed jaw provides a defined grasping profile, while the 12-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a down rongeur.
Surgical Applications
The 12″ Ferris-Smith IVD Rongeur may be used for neurosurgical and spinal surgery applications involving the removal of intervertebral disc material. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the rongeur before use, paying particular attention to the working end, jaw alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the rongeur appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Rongeur?
The overall length is 12 inches.
2. What is the working end / blade or tip design of the instrument?
It features 4 x 10 mm toothed jaw.
3. Is this Rongeur curved or straight?
It features a down configuration.
4. What is a Rongeur used for?
It is designed for controlled removal of intervertebral disc material in neurosurgical applications.
5. What clinical advantage does the down configuration provide?
The down configuration provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgical surgery?
It may be used in neurosurgical and spinal surgery applications where a down rongeur is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Rongeur be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.