The Fry Tungsten Carbide Needle Holder is a compact surgical instrument designed to hold and control suture needles during suturing procedures. With a stated overall length of 125mm, it offers a defined size for instrument selection in surgical, clinical, and other appropriate professional settings.

Needle holders are selected according to their jaw design, gripping surface, length, and handling characteristics. The Fry pattern identifies the instrument style, while the tungsten carbide designation indicates the presence of tungsten carbide components. The exact construction and configuration should be confirmed using the manufacturer's specifications.

Tungsten Carbide Gripping Components

Tungsten carbide is a hard material commonly used in the gripping inserts of selected surgical needle holders. These inserts are designed to provide a durable gripping surface for controlling needles during suturing. Actual gripping performance depends on the insert design, jaw alignment, and overall instrument construction.

The product title does not specify whether the tungsten carbide is used exclusively in the jaw inserts or in other components. Buyers should confirm the exact construction and material details with the supplier. Proper inspection and maintenance are important for preserving the instrument's intended performance.

Fry Pattern Design

The Fry pattern identifies the style of this needle holder. Different needle holder designs may vary in jaw shape, handle structure, locking mechanism, and gripping surface. The product title does not specify the precise jaw profile or whether a ratchet locking mechanism is included.

Before purchasing, review product photographs and technical documentation to verify the instrument's configuration. Selection should be based on the requirements of the intended suturing task and the manufacturer's stated intended use.

125mm Compact Length

The instrument has a stated overall length of 125mm, equivalent to 12.5cm. This measurement allows buyers to compare it with needle holders of different lengths and determine whether its size meets their instrument requirements.

Overall length alone does not establish the working jaw length, handle dimensions, or suitability for a particular procedure. These details should be confirmed if they are important for procurement or compatibility with an existing surgical instrument set.

Handling and Practical Use

Needle holders are designed to help clinicians control suture needles during needle placement and suturing. The instrument's handling characteristics depend on its balance, handle design, jaw alignment, gripping surface, and any locking mechanism.

The title describes the instrument as strong and durable, but it does not provide specific performance ratings or test results. Inspect the instrument for smooth operation, secure jaw closure, and visible defects before use. The needle holder should be selected and handled by qualified personnel according to the procedure and applicable clinical practices.

Material and Construction

The product title identifies tungsten carbide but does not specify the material of the handles, the exact composition of the inserts, or the surface finish. These details should not be assumed from the tungsten carbide designation alone.

For professional procurement, request information about the instrument's construction, material grade, jaw design, and applicable manufacturer documentation. Accurate specifications help buyers compare similar models and establish whether the instrument meets their requirements.

Cleaning, Sterilization, and Maintenance

Follow the manufacturer's instructions for cleaning, disinfection, sterilization, inspection, and storage. The product title does not establish whether the needle holder is reusable, supplied sterile, or compatible with a particular sterilization cycle.

Inspect the jaws, tungsten carbide gripping surfaces, handles, and any locking mechanism before and after use. Remove instruments with damaged inserts, poor alignment, corrosion, loose components, or impaired operation from service. Use only cleaning and reprocessing methods approved by the manufacturer.

Purchasing Considerations

Before ordering the Fry Tungsten Carbide Needle Holder, confirm the 125mm overall length, exact tungsten carbide construction, jaw configuration, locking mechanism, material specifications, and reusable status. Product photographs and technical documentation can help verify that the instrument matches the intended requirements.

Key Features

• Fry pattern surgical needle holder

• Tungsten carbide components as specified in the product title

• Overall length of 125mm

• Designed for holding and controlling suture needles

• Compact manual instrument design

• Intended for appropriate suturing procedures

• Strong and durable design as described in the product title

• Exact jaw profile not specified

• Locking mechanism not specified

• Handle material and surface finish require confirmation

• Reusable status must be verified with the manufacturer

• Cleaning and sterilization according to manufacturer instructions

Product Specifications

Frequently Asked Questions

1. What is the Fry Tungsten Carbide Needle Holder used for?

It is designed to hold and control suture needles during appropriate suturing procedures. The exact applications depend on the instrument's configuration and intended-use documentation.

2. What is the overall length of this needle holder?

The stated overall length is 125mm, equivalent to 12.5cm.

3. What is the purpose of tungsten carbide components?

Tungsten carbide is a hard material commonly used in needle holder gripping inserts to support needle control and wear resistance. The exact construction of this model should be confirmed with the supplier.

4. What does Fry pattern mean?

Fry pattern identifies the instrument style. Specific jaw dimensions, handle design, and locking features should be verified through product documentation.

5. Does this needle holder have a ratchet lock?

The product title does not specify whether a ratchet locking mechanism is included. Confirm this feature before ordering if it is required.

6. What material are the handles made from?

The handle material is not specified. Contact the supplier for details about the handle construction, material grade, and surface finish.

7. Is this needle holder suitable for every type of suture needle?

Not necessarily. Suitability depends on the needle size, jaw configuration, gripping surface, and manufacturer's intended-use information.

8. Can this needle holder be reused?

Reusable status is not specified in the product title. Follow the manufacturer's labeling and instructions before reprocessing or reuse.

9. How should the instrument be cleaned and sterilized?

Use the cleaning and sterilization procedures specified by the manufacturer. Do not assume compatibility with a particular process without confirmation.

10. What should buyers confirm before purchasing?

Verify the 125mm overall length, tungsten carbide construction, jaw configuration, locking mechanism, handle material, reusable status, and manufacturer documentation.