6 1/2″ Inge Retractor No Teeth
Direct Manufacturer Pricing • Tax Exclusive
- 6 1/2″ Inge Retractor No Teeth designed with a straight configuration for gentle soft tissue retraction.
- Toothless working end provides a defined retraction profile for neurosurgical procedures.
- Straight design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and spine surgery applications requiring a straight retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 6 1/2″ Inge Retractor No Teeth is a specialized neurosurgical instrument designed for gentle soft tissue handling where atraumatic contact is required. Its smooth, toothless working end provides a distinct working orientation that can assist with positioning the retraction within the operative field.
With an overall length of 6 1/2 inches and a slim profile, this retractor provides a defined retraction profile for neurosurgical applications. The ergonomic design allows the working end to approach delicate tissues from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 6 1/2-inch overall length for controlled manual handling.
- Toothless working end provides a defined retraction profile.
- Slim profile for specialized working orientation.
- Designed for gentle soft tissue handling.
- Suitable for neurosurgical and spine surgery applications.
- Supports positioning of the working end within the operative field.
- Specialized Inge pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Inge Retractor |
| Overall Length | 6 1/2″ |
| Working End / Blade / Jaw | Toothless working end |
| Configuration | Straight |
| Primary Function | Soft Tissue Retraction |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical / Spine Surgery |
The 6 1/2″ Inge Retractor No Teeth combines a 6 1/2-inch overall length with a toothless working end and straight configuration.
Its defined working profile is intended for gentle soft tissue handling in neurosurgical applications.
Design & Function
The Inge Retractor features a straight working configuration designed to provide a specialized orientation during soft tissue retraction. The toothless working end design can assist in positioning the retraction according to the requirements of the operative field.
The toothless working end provides a defined retraction profile, while the 6 1/2-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a straight retractor.
Surgical Applications
The 6 1/2″ Inge Retractor No Teeth may be used for neurosurgical and spine surgery applications involving gentle soft tissue retraction. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Inge Retractor before use, paying particular attention to the working end and alignment. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Inge Retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Inge Retractor?
The overall length is 6 1/2 inches.
2. What is the working end / blade or tip design of the instrument?
It features toothless working end.
3. Is this Inge Retractor curved or straight?
It features a Straight configuration.
4. What is an Inge Retractor used for?
It is designed for controlled soft tissue retraction in neurosurgical applications.
5. What clinical advantage does the toothless design provide?
The toothless design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and spine surgery applications where a straight and toothless retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Inge Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.