10 1/4″ Lumbar Axial Curette 5-0 Reverse Angled Up
Direct Manufacturer Pricing • Tax Exclusive
- 10 1/4″ Lumbar Axial Curette 5-0 Reverse Angled Up designed with a reverse angled configuration for controlled tissue removal and curettage.
- 5-0 reverse angled tip provides a defined cutting profile for neurosurgical procedures.
- Reverse angled design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and lumbar spine applications requiring a reverse angled curette.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 10 1/4″ Lumbar Axial Curette 5-0 Reverse Angled Up is a specialized neurosurgical instrument designed for controlled removal of larger tissue volumes in lumbar spine procedures. Its reverse upward-angled working end allows surgeons to access hard-to-reach areas safely while maintaining precision.
With an overall length of 10 1/4 inches and a 5-0 reverse angled tip, this curette provides optimal reach, balance, and tactile feedback for effective disc and soft-tissue curettage. The reverse angled configuration allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 10 1/4-inch overall length for controlled manual handling.
- 5-0 reverse angled tip provides a defined cutting profile.
- Reverse angled configuration for specialized working orientation.
- Designed for controlled tissue removal and curettage.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Lumbar Axial pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Lumbar Axial Curette |
| Overall Length | 10 1/4″ |
| Working End / Blade / Jaw | 5-0 Reverse Angled Tip |
| Configuration | Reverse Angled |
| Primary Function | Tissue Removal and Curettage |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 10 1/4″ Lumbar Axial Curette 5-0 Reverse Angled Up combines a 10 1/4-inch overall length with a 5-0 reverse angled tip.
Its defined working profile is intended for controlled tissue removal in neurosurgical applications.
Design & Function
The Lumbar Axial Curette features a reverse angled working configuration designed to provide a specialized orientation during lumbar spine procedures. The reverse angled tip can assist in positioning the working end according to the requirements of the operative field.
The 5-0 reverse angled tip provides a defined cutting profile, while the 10 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a reverse angled curette.
Surgical Applications
The 10 1/4″ Lumbar Axial Curette 5-0 Reverse Angled Up may be used for neurosurgical and lumbar spine applications involving controlled tissue removal and curettage. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Lumbar Axial Curette before use, paying particular attention to the working end, alignment, and cutting edges. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Lumbar Axial Curette appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Lumbar Axial Curette?
The overall length is 10 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 5-0 reverse angled tip.
3. Is this Lumbar Axial Curette curved or straight?
It features a reverse angled configuration.
4. What is a Lumbar Axial Curette used for?
It is designed for controlled tissue removal and curettage in neurosurgical applications.
5. What clinical advantage does the reverse angled design provide?
The reverse angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgical surgery?
It may be used in neurosurgical and lumbar spine applications where a reverse angled curette is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Lumbar Axial Curette be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.