14″ Murphy Ball Retractor 3mm Angled 60°
Direct Manufacturer Pricing • Tax Exclusive
- 14″ Murphy Ball Retractor designed with an angled 60° configuration for delicate tissue retraction.
- 3 mm ball tip provides a defined retraction profile for neurosurgical procedures.
- Angled design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and spinal surgery applications requiring an angled retractor.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 14″ Murphy Ball Retractor is a specialized neurosurgical instrument designed for delicate nerve and tissue retraction. Its 3mm ball tip provides atraumatic contact, while the 60° angled shaft allows optimal approach and visibility around sensitive structures.
With an overall length of 14 inches and a 3mm ball tip, this retractor provides a defined retraction profile for neurosurgical applications. The angled design allows the working end to approach anatomical targets from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 14-inch overall length for deep access while keeping the surgeon’s hand clear of the operative field.
- 3 mm ball tip provides atraumatic contact for delicate tissue handling.
- Angled 60° configuration for optimal approach and visibility around sensitive structures.
- Designed for delicate nerve and tissue retraction.
- Suitable for neurosurgical and spinal applications.
- Supports positioning of the working end within the operative field.
- Specialized Murphy pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Murphy Ball Retractor |
| Overall Length | 14″ |
| Working End / Blade / Jaw | 3 mm ball tip |
| Configuration | Angled 60° |
| Primary Function | Tissue Retraction |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical / Spinal Surgery |
The 14″ Murphy Ball Retractor combines a 14-inch overall length with a 3mm ball tip and angled configuration.
Its defined working profile is intended for delicate tissue retraction in neurosurgical applications.
Design & Function
The Murphy Ball Retractor features an angled 60° working configuration designed to provide a specialized orientation during tissue retraction. The ball tip design can assist in positioning the working end according to the requirements of the operative field.
The 3mm ball tip provides a defined retraction profile, while the 14-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring an angled retractor.
Surgical Applications
The 14″ Murphy Ball Retractor may be used for neurosurgical and spinal surgery applications involving delicate nerve and tissue retraction. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Murphy Ball Retractor before use, paying particular attention to the working end and ball tip. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Murphy Ball Retractor appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Murphy Ball Retractor?
The overall length is 14 inches.
2. What is the working end / blade or tip design of the instrument?
It features a 3 mm ball tip.
3. Is this Murphy Ball Retractor curved or straight?
It features an angled 60° configuration.
4. What is a Murphy Ball Retractor used for?
It is designed for controlled tissue retraction in neurosurgical applications.
5. What clinical advantage does the angled design provide?
The angled design provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and spinal surgery applications where an angled retractor is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Murphy Ball Retractor be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.