Penfield Dissector MRI Compatible No. 3 Double End 7 3/4″

The Penfield Dissector MRI Compatible No. 3 Double End 7 3/4″ is a specialized surgical instrument designed for controlled tissue dissection and manipulation. Its double-ended configuration provides two working ends in a single instrument, offering flexibility for surgical tasks that require careful tissue handling. The No. 3 designation identifies the model within the Penfield dissector range.

With a stated overall length of 7 3/4 inches, approximately 19.7 cm, this instrument can be selected for surgical instrument inventories requiring this particular size and model. The precise working-end shapes, dimensions, and functions should be verified with the manufacturer because these details are not fully established by the product title alone.

Double-Ended Design

The instrument features a working end at each side, allowing the user to select the end suited to the task based on its design. Depending on the manufacturer's configuration, the two ends may differ in shape or dimensions. This design combines two working ends in one instrument and may help limit instrument changes during selected procedures.

For accurate purchasing and clinical use, verify the geometry of both ends against the manufacturer's product specifications. The model number should not be used as the sole basis for determining tip shape or intended application.

Surgical Applications

Penfield dissectors are commonly associated with specialized surgical procedures involving tissue separation and manipulation. The exact role of the No. 3 model depends on its verified working-end design and the procedure being performed. It may be considered for appropriate surgical instrument trays where this model is specified.

Instrument selection and use should be determined by qualified healthcare professionals according to the procedure, the manufacturer's stated intended use, and established clinical protocols.

MRI Compatibility

This product is identified as MRI compatible in its title. MRI safety must nevertheless be established from the manufacturer's documentation for the exact instrument. Compatibility can depend on material composition, construction, MRI system conditions, and any restrictions specified by the manufacturer.

Before introducing the instrument into an MRI environment, confirm its formal MRI safety classification and all applicable conditions of use. Do not interpret the product title alone as proof that it is safe under every MRI condition.

Length and Construction

The stated overall length is 7 3/4 inches, equivalent to approximately 19.7 cm. This measurement helps distinguish the instrument from other Penfield dissectors offered in different lengths.

The product title does not specify the material grade, surface finish, handle design, or detailed dimensions of either working end. These specifications should be obtained from the supplier to ensure that the instrument meets the requirements of the intended application.

Cleaning and Maintenance

Reprocessing requirements depend on whether the instrument is reusable or single-use and on the manufacturer's instructions. If supplied as a reusable instrument, it should be cleaned, inspected, and sterilized using the validated procedures specified for that model. Inspect both working ends for visible damage, deformation, corrosion, or wear before use.

Selecting the Correct Model

When purchasing the Penfield Dissector MRI Compatible No. 3 Double End, verify its 7 3/4-inch length, working-end configuration, material specifications, MRI safety documentation, and reprocessing requirements. Confirming these details supports accurate inventory management and appropriate instrument selection.

Key Features

• Penfield Dissector No. 3 model designation

• Double-ended surgical instrument design

• Stated overall length of 7 3/4 inches

• Approximately 19.7 cm in length

• Intended for tissue dissection and manipulation according to verified design

• Identified as MRI compatible; manufacturer documentation required

• Two working ends in one instrument

• Working-end shapes and dimensions should be confirmed

• Material grade and surface finish not specified

• Reusability must be confirmed with the supplier

• Follow manufacturer instructions for cleaning and sterilization when applicable

Product Specifications

Frequently Asked Questions

1. What is the Penfield Dissector No. 3 used for?

It is a surgical dissector intended for tissue dissection and manipulation. Its exact applications depend on its working-end configuration and verified intended use.

2. What does double-ended mean?

The instrument has a working end at each end. The specific shape and function of each end should be confirmed with the manufacturer.

3. What is the length of this instrument?

The stated overall length is 7 3/4 inches, approximately 19.7 cm.

4. Is the Penfield Dissector No. 3 MRI compatible?

The product title identifies it as MRI compatible. Confirm the manufacturer's formal MRI safety labeling and conditions of use before use in an MRI environment.

5. What material is this dissector made from?

The material grade is not specified in the product title. Contact the supplier for verified material and finish details.

6. Is this instrument reusable?

Its reusable or single-use status must be confirmed with the supplier. Follow the manufacturer's instructions for the exact model.

7. Can the instrument be sterilized?

Sterilization compatibility depends on the instrument's construction and manufacturer instructions. Use only an approved reprocessing method if it is designated reusable.

8. How does the No. 3 model differ from the No. 2 model?

Numbered Penfield dissectors may differ in working-end geometry or intended application. Compare the manufacturer's specifications rather than assuming the differences from model numbers alone.

9. What should be checked before purchasing?

Verify the overall length, both working-end configurations, material, MRI safety documentation, intended use, and reprocessing requirements.