9 1/4″ Saxena-Style Inge Spreader 3/8″ Jaw
Direct Manufacturer Pricing • Tax Exclusive
- 9 1/4″ Saxena-Style Inge Spreader 3/8″ Jaw designed with a calibrated bar configuration for controlled distraction and measurement.
- 3/8 inch jaw width provides a defined spreading profile for neurosurgical procedures.
- Calibrated design supports a specialized working orientation within the operative field.
- Suitable for neurosurgical and spine surgery applications requiring a calibrated spreading instrument.
All import duties, tariffs & taxes are 100% pre-paid for USA, UK, Canada, EUROPE & Australia (AUS). Zero surprise customs bills at delivery.
Hospital & Volume Procurement Pricing
The 9 1/4″ Saxena-Style Inge Spreader 3/8″ Jaw is a specialized neurosurgical instrument designed for controlled distraction and measurement during spine surgery. Its calibrated bar allows accurate assessment of distraction width, while the 9 1/4″ overall length provides excellent leverage and control within the operative field.
With an overall length of 9 1/4 inches and a 3/8″ jaw width, this spreader provides a defined spreading profile for neurosurgical applications. The ergonomic design allows the working end to approach the anatomical target from a specialized angle, supporting controlled manual manipulation during procedures.
Key Features
- 9 1/4-inch overall length for controlled manual handling.
- 3/8 inch jaw width provides a defined spreading profile.
- Calibrated bar configuration for specialized working orientation.
- Designed for controlled distraction and measurement.
- Suitable for neurosurgical applications.
- Supports positioning of the working end within the operative field.
- Specialized Saxena-Style pattern for professional neurosurgical instrument sets.
- Corrosion-resistant surgical-grade German AISI 420 stainless steel construction.
- Autoclavable and reusable (Steam autoclave up to 134°C / 273°F).
Technical Specifications
| Specification | Details |
|---|---|
| Instrument Type | Saxena-Style Inge Spreader |
| Overall Length | 9 1/4″ |
| Working End / Blade / Jaw | 3/8 inch Jaw |
| Configuration | Calibrated Bar |
| Primary Function | Controlled Distraction and Measurement |
| Material | German Stainless Steel (AISI 420) |
| Sterilization | Steam Autoclavable (up to 134°C / 273°F) |
| Application Type | Neurosurgical |
The 9 1/4″ Saxena-Style Inge Spreader 3/8″ Jaw combines a 9 1/4-inch overall length with a 3/8 inch jaw width and calibrated bar configuration.
Its defined working profile is intended for controlled distraction and measurement in neurosurgical applications.
Design & Function
The Saxena-Style Inge Spreader features a calibrated bar configuration designed to provide a specialized orientation during spinal procedures. The jaw design can assist in positioning the working end according to the requirements of the operative field.
The 3/8 inch jaw width provides a defined spreading profile, while the 9 1/4-inch overall length allows controlled manual positioning. Together, these dimensions provide a practical configuration for neurosurgical procedures requiring a calibrated spreading instrument.
Surgical Applications
The 9 1/4″ Saxena-Style Inge Spreader 3/8″ Jaw may be used for neurosurgical and spine surgery applications involving controlled distraction and measurement. Specific use depends on the surgical procedure, technique, anatomical site, and preference of the clinical team.
Handling & Instrument Care
Inspect the Saxena-Style Inge Spreader before use, paying particular attention to the working end, jaw alignment, and calibrated bar. Ensure the instrument is properly aligned and free from visible damage or wear before use.
After use, clean and process the instrument according to the manufacturer's validated instructions and the healthcare facility's established instrument-processing protocols. Store the Saxena-Style Inge Spreader appropriately to protect its working end and prevent unnecessary contact with other instruments.
Frequently Asked Questions
1. What is the overall length of this Inge Spreader?
The overall length is 9 1/4 inches.
2. What is the working end / blade or tip design of the instrument?
It features 3/8 inch jaw width.
3. Is this Inge Spreader curved or straight?
It features a calibrated bar configuration.
4. What is a Inge Spreader used for?
It is designed for controlled distraction and measurement in neurosurgical applications.
5. What clinical advantage does the calibrated bar provide?
The calibrated bar provides a specialized working orientation for positioning the working end within the operative field.
6. Is this instrument suitable for neurosurgery?
It may be used in neurosurgical and spine surgery applications where a calibrated spreading instrument is appropriate.
7. Does the specification refer to the working end?
Yes. The supplied specification refers to the working profile and functional geometry of the instrument.
8. How should the Inge Spreader be cleaned and maintained?
It should be inspected, cleaned, steam autoclaved (up to 134°C / 273°F), and stored according to manufacturer instructions and healthcare facility protocols.