The Stanton Nail/Screw Drill Guide Assembly is a specialized orthopedic drill-guide system designed for compatible screw applications involving the distal humerus, femur, or tibia. The complete assembly consists of a locking drill guide holder, drill guide sleeve, and trocar.

The components can also be supplied individually, allowing selection of the complete assembly or the specific guide component required for a compatible instrumentation setup.

Complete Assembly

The complete assembly includes:

• 1 × Locking Drill Guide Holder
• 1 × Drill Guide Sleeve
• 1 × Trocar

The combined configuration provides a dedicated guide assembly for compatible distal humeral, femoral, or tibial screw applications.

Drill Guide Sleeve

The Drill Guide Sleeve has an overall length of 3.85" (9.8 cm) and an outside diameter of 7 mm. It forms the sleeve component of the guide assembly.

Trocar Alignment Tool

The Trocar Alignment Tool has an overall length of 4.375" (11.1 cm) and a 5 mm trocar diameter. It provides the alignment component of the assembly.

Locking Drill Guide Holder

The Locking Drill Guide Holder measures 10.5" (26.7 cm) overall. It has a 21 mm guide height and a 5.5 mm closed guide internal diameter.

The locking holder provides the primary support and guide configuration for the compatible assembly.

Individual Component Availability

The system provides flexibility through individual component availability:

• Complete Assembly: Holder + Sleeve + Trocar
• Drill Guide Sleeve: Available individually
• Trocar Alignment Tool: Available individually
• Locking Drill Guide Holder: Available individually

Orthopedic Applications

The Stanton Nail/Screw Drill Guide Assembly is designed for compatible distal humeral, femoral, and tibial screw applications. Component selection should be based on the compatible implant system, required guide dimensions, and applicable surgical technique.

Handling and Use Considerations

Confirm compatibility between the holder, sleeve, trocar, and intended fixation system before use. Components should be handled according to the applicable surgical technique and manufacturer instructions.

Cleaning and Instrument Care

After use, clean each component according to validated instrument-processing procedures. Particular attention should be given to the internal guide surfaces, sleeve, trocar, locking mechanism, and guide openings.

Sterilization and Inspection

Inspect all components for cleanliness, unobstructed guide pathways, proper mechanical function, and structural integrity before use. Sterilization should be performed according to the manufacturer's validated instructions and applicable healthcare facility protocols.

Technical Specifications

Frequently Asked Questions

What is included in the complete assembly?

The complete assembly includes one holder, one sleeve, and one trocar.

Can the components be purchased individually?

Yes. The Drill Guide Sleeve, Trocar Alignment Tool, and Locking Drill Guide Holder are also available individually.

What is the length of the Drill Guide Sleeve?

The sleeve has an overall length of 3.85" (9.8 cm) and a 7 mm outside diameter.

What is the length of the Trocar Alignment Tool?

The trocar alignment tool measures 4.375" (11.1 cm) overall and has a 5 mm trocar diameter.

What are the dimensions of the Locking Drill Guide Holder?

The holder measures 10.5" (26.7 cm) overall, with a 21 mm guide height and 5.5 mm closed guide internal diameter.

What applications is the assembly designed for?

It is designed for compatible distal humeral, femoral, or tibial screw applications.