Titanium 3.5mm Tubular Plate Set with Cortical Screws

The Tubular One-Third 3.5 mm Plate Set is an orthopedic fixation system supplied with plates featuring 5–12 holes and cortical screws. The set is identified as Titanium Grade 5 and contains 59 pieces, making it a potential option for orthopedic facilities that require a selection of plate lengths and compatible fixation components.

One-third tubular plates are contoured plates used in selected fracture fixation procedures. Their narrow profile and tubular cross-section are designed for applications where a low-profile plate may be suitable for the relevant bone anatomy. The specific indication depends on the fracture pattern, anatomical location, bone quality, and the treating surgeon's assessment.

Orthopedic Applications

One-third tubular plates are commonly associated with selected fracture fixation applications, including certain fractures of the fibula and other bones where the plate design and fixation system are appropriate. The plate must be selected according to the required anatomical fit, fracture configuration, and intended fixation method.

The 3.5 mm designation identifies the plate system category, but it does not establish the dimensions of every screw included in this particular set. The exact screw diameters, lengths, thread specifications, and compatibility should be verified using the manufacturer's product documentation.

Plate Design and Hole Configuration

This set includes one-third tubular plates with hole configurations ranging from 5 to 12 holes. Plate length and hole count influence the available fixation positions and help the surgical team select an appropriate configuration for the intended application. The exact plate lengths, hole spacing, thickness, and contour are not specified in the product title and should be confirmed before ordering.

Proper plate selection requires consideration of the fracture location, available bone stock, reduction requirements, and the manufacturer's recommendations. The plates and screws should be used only as part of a compatible fixation system.

Titanium Grade 5 Construction

The product title identifies Titanium Grade 5 as the plate material. This titanium alloy is widely used in medical and orthopedic applications because of its strength-to-weight characteristics and corrosion resistance. However, the exact material composition and certification for the supplied plates and screws should be confirmed through the manufacturer's documentation.

The product title does not independently confirm whether every component in the 59-piece set uses the same material. Buyers should verify the materials of both plates and screws, along with any applicable product standards and traceability information.

Cortical Screws and Fixation Compatibility

Cortical screws are designed to engage cortical bone and provide fixation when used with a compatible plate system. Screw selection depends on bone anatomy, required fixation, plate design, and the manufacturer's guidance. The supplied screws must match the plate's hole specifications and approved screw system.

Do not assume that the set is compatible with every 3.5 mm plate or screw system based only on the nominal size. Confirm the exact interface, screw lengths, driver requirements, and approved combinations before clinical use.

Set Configuration and Instrument Care

The product is described as a 59-piece set. The precise breakdown of plates and screws is not specified, so the complete inventory should be checked against the supplier's packing list before purchase. Verify whether any instruments, storage case, or additional accessories are included rather than assuming they form part of the set.

Implants and fixation components must be handled, stored, and used according to their labeling and manufacturer instructions. Confirm the supplied components' sterile status and intended processing requirements; do not assume the set is sterile or reusable. Appropriate clinical selection and implantation must be performed by qualified professionals.

Key Features

• One-third tubular orthopedic plate system

• 3.5 mm plate system designation

• Plate configurations from 5 to 12 holes

• Includes cortical screws

• 59-piece set as specified in the product title

• Titanium Grade 5 material stated in the title

• Designed for compatible orthopedic fracture fixation applications

• Multiple plate lengths for selection according to clinical requirements

• Screw dimensions and component breakdown require confirmation

• Compatibility must be verified with the manufacturer

Product Specifications

Frequently Asked Questions

1. What is a one-third tubular 3.5 mm plate used for?

It is used in selected orthopedic fracture fixation applications where a one-third tubular plate is appropriate for the bone anatomy and fracture pattern. Suitability must be determined by a qualified surgeon.

2. What is included in this 59-piece titanium plate set?

The title specifies one-third tubular plates with 5–12 holes and cortical screws, totaling 59 pieces. The exact number of plates and screws should be confirmed with the supplier.

3. What does 5–12 holes mean?

It indicates that the set includes plate configurations with hole counts ranging from 5 to 12. The exact plate lengths and quantity of each configuration are not specified.

4. What material is used for these plates?

The product title identifies Titanium Grade 5. Confirm the material documentation for all supplied components, including the cortical screws.

5. Are the included cortical screws compatible with the plates?

The set is described as including cortical screws, but exact screw dimensions and compatibility details are not provided. Confirm the approved screw and plate combinations with the manufacturer.

6. Is this set suitable for fibula fracture fixation?

One-third tubular plates are used in selected fibular fracture fixation applications. The suitability of this particular set depends on the fracture, anatomy, and manufacturer specifications.

7. Is the 59-piece set sterile?

Sterile status is not specified in the product title. Check the packaging and manufacturer labeling before clinical use.

8. What should be checked before purchasing this orthopedic plate set?

Verify the plate hole configurations, plate lengths, screw diameters and lengths, material documentation, total component inventory, system compatibility, and sterile status.