Variable Angle Distal Radius Volar Plates SS 316L

The Variable Angle Distal Radius Volar Plates SS 316L 79-Piece Set is designed for orthopedic procedures involving fixation of fractures near the wrist joint. The distal radius is the lower portion of the radius bone, and fractures in this area may require surgical stabilization depending on fracture displacement, stability, bone quality, and the patient's clinical condition. A volar plate is positioned on the palm-side surface of the distal radius to support fracture reduction and maintain alignment during healing.

Variable-Angle Locking Design

Variable-angle locking technology allows compatible screws to be inserted at different angles within a manufacturer-defined range. This flexibility can help the surgeon adapt screw trajectories to the fracture pattern and available bone anatomy. The permitted angular range, locking mechanism, screw dimensions, and compatible components depend on the specific implant system and must be verified in the manufacturer's instructions.

Volar distal radius plates are designed for placement along the anterior surface of the distal radius. Plate contour, hole arrangement, length, and left- or right-sided configuration can influence suitability for different fracture patterns. The exact plate designs and sizes included in this 79-piece set are not identified in the product title, so a complete inventory should be requested before ordering.

Material and Construction

The product title specifies SS 316L stainless steel. This designation refers to a low-carbon stainless steel grade commonly associated with corrosion resistance. However, the material's suitability for a particular implant application depends on its certified composition, manufacturing process, applicable implant standards, and the manufacturer's documentation.

Confirm that the plates and screws are manufactured from the stated material and are approved for their intended orthopedic use. Do not assume that all components in the set share the same material unless the supplier confirms this. Compatibility between the plates and screws is also essential, especially in variable-angle locking systems.

Orthopedic Applications

Volar distal radius plating may be used for selected distal radius fractures when surgical fixation is indicated. The choice of plate and screw configuration depends on fracture location, complexity, bone quality, patient anatomy, and the surgeon's treatment plan. Variable-angle screw placement may provide flexibility when the required screw trajectory must be adjusted to the fracture or anatomical structures.

The set should only be used for indications covered by the specific implant system's labeling and instructions for use. Qualified orthopedic surgeons must determine plate placement, screw length, fixation strategy, and the appropriate surgical technique.

79-Piece Set Configuration

The 79-piece designation indicates the stated total quantity, but the product title does not specify the exact component breakdown. The set may include multiple plate configurations and compatible screws, but the precise contents must be confirmed rather than assumed. Request an itemized list showing plate types, hole counts, laterality, screw diameters, screw lengths, and any included accessories or storage case.

Confirm whether implantation instruments are included or must be purchased separately. Also verify packaging, traceability, regulatory documentation, and sterility status before clinical use.

Handling and Quality Considerations

Inspect packaging and components before use, and do not implant items with damaged packaging, visible defects, or uncertain traceability. Storage, handling, and preparation must follow the manufacturer's instructions. If the components are supplied non-sterile, only use the validated preparation and sterilization procedures specified by the manufacturer.

The Variable Angle Distal Radius Volar Plates SS 316L 79-Piece Set provides a stated 79-piece configuration for orthopedic fixation planning. Verify the complete contents, certified material specifications, component compatibility, and approved indications with the manufacturer or supplier before purchase and clinical application.

Key Features

• Variable-angle distal radius volar plate system

• Designed for selected distal radius fracture fixation

• Volar plate configuration for placement on the palm-side of the radius

• SS 316L stainless steel specified in the product title

• Stated set quantity of 79 pieces

• Supports variable-angle screw placement within the approved range

• Intended for professional orthopedic surgical use

• Plate sizes and hole configurations require confirmation

• Screw dimensions and lengths not specified

• Plate and screw compatibility must be verified

• Complete set inventory should be requested before ordering

• Sterility status and preparation instructions must be confirmed

Product Specifications

Frequently Asked Questions

1. What are Variable Angle Distal Radius Volar Plates used for?

They are intended for surgical fixation of selected fractures of the distal radius. The specific indication depends on the implant system's approved labeling and the surgeon's clinical assessment.

2. What does variable-angle locking mean?

Variable-angle locking allows compatible screws to be placed at different angles within a defined range. The permitted range and technique depend on the specific implant system.

3. What does SS 316L mean?

SS 316L refers to a low-carbon stainless steel grade known for corrosion resistance. Confirm the certified material composition and suitability for the intended implant application with the manufacturer.

4. What is included in the 79-piece set?

The title specifies 79 pieces but does not provide an itemized contents list. Ask the supplier to confirm the number and types of plates, screws, and accessories included.

5. Are the plates suitable for left and right wrists?

The product title does not specify laterality. Confirm whether the set includes left-sided plates, right-sided plates, or both.

6. Can other locking screws be used with these plates?

Only screws specifically approved as compatible with the plate system should be used. Verify the screw dimensions, locking mechanism, material, and variable-angle compatibility with the manufacturer.

7. Is the set supplied sterile?

Sterility status is not stated in the product title. Confirm the packaging and preparation requirements with the supplier before clinical use.