Variable Angle Locking Extra-Articular Oblique Plate

The Variable Angle Locking Extra-Articular Oblique Plate SS 316L is an orthopedic implant intended for fracture fixation in applications supported by the manufacturer's specifications. Its extra-articular designation indicates a design intended for fracture patterns outside a joint surface, while the oblique plate configuration describes its angled structural profile. The exact anatomical site and approved indications must be confirmed from the product's technical documentation before selection.

Variable-Angle Locking Technology

Variable-angle locking plate systems allow compatible screws to be inserted at different angles within a defined range. This feature can help surgeons adapt screw trajectories to the fracture pattern and available bone anatomy while maintaining the intended locking connection between the screw and plate. The permitted angulation, compatible screw types, and fixation technique vary by system and must follow the manufacturer's instructions.

The oblique configuration may provide a specific plate orientation for selected fracture patterns. Plate length, contour, thickness, hole arrangement, and anatomical compatibility are important factors when selecting an implant. These specifications are not included in the product title and should be verified with the manufacturer or supplier.

Extra-Articular Fracture Fixation

Extra-articular fractures occur outside the joint surface. Depending on the implant's intended anatomical site, an extra-articular plate may help stabilize a suitable fracture while maintaining alignment during bone healing. The precise application of this oblique plate cannot be established from its name alone, so the intended bone, fracture type, and approved use must be confirmed before ordering.

Implant selection depends on fracture location, bone quality, patient anatomy, and the surgeon's treatment plan. Qualified orthopedic surgeons must assess whether the plate design, dimensions, and compatible screw configuration are appropriate for the specific fracture. The implant should only be used for indications covered by its approved labeling and instructions for use.

Material and Construction

The product title specifies SS 316L stainless steel. This low-carbon stainless steel grade is associated with corrosion resistance, but the material's suitability for an implant application depends on its certified composition, manufacturing process, applicable standards, and regulatory documentation.

Confirm the material specification for the plate and compatible screws before purchase. Do not assume that screws from other systems can be used interchangeably. Variable-angle locking systems require components that are specifically designed and approved to work together.

Handling, Compatibility, and Quality Checks

Before ordering, verify the plate's intended anatomical site, dimensions, hole count, laterality, compatible screw diameters and lengths, and any required implantation instruments. Request the manufacturer's technical datasheet and itemized specifications if these details are not supplied.

Inspect packaging and components before use. Do not implant a component with damaged packaging, visible defects, or uncertain traceability. Storage, handling, and preparation must follow the manufacturer's instructions. Confirm whether the implant is supplied sterile and follow the specified preparation procedures if additional processing is required.

The Variable Angle Locking Extra-Articular Oblique Plate SS 316L offers a variable-angle fixation design in the stated stainless steel material. Its exact anatomical application, dimensions, screw compatibility, and approved indications should be verified with the manufacturer before clinical use.

Key Features

• Variable-angle locking plate design

• Extra-articular fracture fixation configuration

• Oblique plate profile

• SS 316L stainless steel specified in the product title

• Allows compatible screws to be positioned within an approved angular range

• Intended for orthopedic fixation applications

• Anatomical site requires manufacturer confirmation

• Plate dimensions and hole configuration not specified

• Compatible screw sizes and lengths require verification

• Components must be compatible with the designated fixation system

• Sterility status should be confirmed before use

• Use according to manufacturer instructions and approved indications

Product Specifications

Frequently Asked Questions

1. What is a Variable Angle Locking Extra-Articular Oblique Plate used for?

It is intended for selected orthopedic fracture-fixation applications. The specific bone and approved indications must be confirmed from the manufacturer's documentation.

2. What does extra-articular mean?

Extra-articular describes a fracture located outside the joint surface. The appropriate implant depends on the anatomical site and the characteristics of the fracture.

3. What does variable-angle locking mean?

It allows compatible screws to be placed at different angles within a manufacturer-defined range while maintaining the intended locking connection. The permitted range depends on the implant system.

4. What does SS 316L mean?

SS 316L is a low-carbon stainless steel grade associated with corrosion resistance. Confirm the certified material specification and suitability for the intended implant application with the manufacturer.

5. Why is the plate described as oblique?

Oblique refers to the plate's angled design or configuration. Its exact geometry and intended anatomical placement should be confirmed using the manufacturer's product documentation.

6. Can standard locking screws be used with this plate?

Not necessarily. Only screws specifically approved for the plate system should be used. Confirm compatible screw dimensions, material, and locking mechanism with the manufacturer.

7. Is the plate supplied sterile?

The product title does not specify sterility status. Confirm packaging, sterility, and any required preparation procedures with the supplier before clinical use.