VATS Harken #2 Clamp 10mm Shaft 95mm DeBakey Jaws

The VATS Harken #2 Clamp with a 10 mm shaft, 95 mm measurement, and DeBakey 1×2 jaws is a specialized surgical instrument intended for controlled grasping or clamping of suitable tissue during procedures where its design is appropriate. The VATS designation refers to video-assisted thoracic surgery, a minimally invasive approach used in selected chest procedures. The instrument's precise function and compatibility should be confirmed with the manufacturer before clinical use.

Design and Jaw Configuration

This instrument is identified as a Harken #2 clamp and features DeBakey-style 1×2 jaws. The 1×2 designation typically describes an interlocking tooth arrangement, with one tooth engaging between two opposing teeth. DeBakey-style jaw patterns are associated with atraumatic tissue handling when used appropriately, but actual tissue interaction depends on the instrument's jaw geometry, alignment, and applied pressure.

The 10 mm shaft designation identifies the stated shaft dimension. Confirm whether this refers to shaft diameter and verify compatibility with the intended access port or surgical system. The product title also specifies 95 mm, but does not clarify whether this measurement refers to working length, overall length, or another dimension. The manufacturer's technical documentation should be consulted to establish the exact measurements.

Surgical Applications

Clamps used in thoracic surgery may assist with controlled tissue handling, positioning, or temporary occlusion, depending on their specific design. The VATS Harken #2 Clamp should only be used for the function and anatomical applications approved for this particular model. Its name alone does not establish suitability for a specific vessel, tissue structure, or surgical procedure.

The DeBakey-style jaw pattern may be useful when controlled engagement of delicate tissue is required. However, the appropriate instrument depends on the target tissue, access angle, required grip, and surgeon's technique. Qualified surgical professionals should select and operate the instrument according to established protocols and manufacturer instructions.

Shaft Dimensions and Instrument Compatibility

Shaft dimensions are important when selecting instruments for minimally invasive procedures. A shaft that does not match the access port or surgical system may be unsuitable for the intended approach. Confirm the actual shaft diameter, working length, overall length, handle mechanism, and compatibility with the relevant equipment before ordering.

The stated 95 mm measurement should not be treated as the overall instrument length unless the manufacturer confirms this. Buyers should also verify whether the clamp is designed for manual use or compatibility with a particular surgical system, as the product title does not provide these details.

Handling, Cleaning, and Maintenance

Inspect the clamp before each use for jaw alignment, smooth operation, damage, corrosion, and wear. Ensure the jaws open and close correctly and that the tooth pattern is intact. Do not use an instrument with damaged or misaligned jaws, as this may compromise controlled tissue handling.

Cleaning and sterilization must follow the manufacturer's validated reprocessing instructions and the healthcare facility's infection-prevention protocols. Pay particular attention to the jaw surfaces and shaft, where biological material may collect. Rinse, dry, and inspect the instrument as directed before packaging and sterilization.

The product title does not specify the instrument's material, reusable status, or sterilization compatibility. Confirm these details with the manufacturer rather than assuming them. Store the instrument in a suitable protective tray to help prevent damage to its working end.

The VATS Harken #2 Clamp is a specialized instrument whose suitability depends on verified dimensions, jaw configuration, and intended surgical application. Confirm its complete specifications and compatibility before purchasing or using it in a clinical setting.

Key Features

• VATS Harken #2 clamp configuration

• DeBakey-style 1×2 jaw pattern

• Stated 10 mm shaft dimension

• Listed 95 mm measurement

• Designed for controlled tissue engagement when appropriate

• Intended for professional surgical environments

• Potential use in suitable minimally invasive procedures

• Exact working and overall lengths require confirmation

• Access-port compatibility must be verified

• Jaw alignment and function should be inspected before use

• Material and reusable status not specified

• Cleaning and sterilization according to manufacturer instructions

Product Specifications

Frequently Asked Questions

1. What is a VATS Harken #2 Clamp used for?

It is a specialized surgical clamp intended for applications compatible with its design. The exact clinical function should be confirmed from the manufacturer's documentation.

2. What does the 10 mm shaft specification mean?

It identifies a stated shaft dimension. Confirm whether it refers to the shaft diameter and verify compatibility with the intended access port or surgical system.

3. What does DeBakey 1×2 jaws mean?

The designation typically describes a tooth arrangement in which one tooth on one jaw engages between two teeth on the opposing jaw. The precise jaw design should be verified with the manufacturer.

4. What does the 95 mm measurement refer to?

The product title does not clarify whether 95 mm represents working length, overall length, or another dimension. Confirm the measurement reference before ordering.

5. Is this clamp suitable for video-assisted thoracic surgery?

The VATS designation suggests an intended context involving video-assisted thoracic procedures, but suitability depends on the instrument's verified specifications and approved use.

6. What material is the VATS Harken #2 Clamp made from?

The product title does not specify the material. Request the manufacturer's material specification before purchase.

7. Can this clamp be reused and sterilized?

Reusable status and sterilization compatibility are not stated in the product title. Follow the manufacturer's validated instructions for cleaning, inspection, sterilization, and reuse.